Ricoh MP C305 Control panal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cucuklotz
    Senior Tech

    Site Contributor
    500+ Posts
    • Mar 2007
    • 611

    #1

    Ricoh MP C305 Control panal

    Good evening all.hope everyone is ok and taking one day at a time.
    I have been trying to find the part number for the touchscreen control board with the keypad.The keyboard is not working properly so I am not able to enter the service mode to reset a error code.I tried to purchase the service /parts manual but not able to find online.If you can give me part # that would be helpful.If you have a link to where I can purchase the parts manual that would reall be great.I never thought at 67 I would still be doing this,I thought the stress would have killed me way before this.
    Thank you all and have a peaceful night
    Andy
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37052

    #2
    Re: Ricoh MP C305 Control panal

    D1171497 LCD:UWVGA:MV:A SS'Y

    D1171431 PCB:LCDCARFT:A SS'Y

    D1171460 PCB:UWVGA:OP-R :ASS'Y

    PM me with an email address if you want the manuals.

    Comment

    • cucuklotz
      Senior Tech

      Site Contributor
      500+ Posts
      • Mar 2007
      • 611

      #3
      Re: Ricoh MP C305 Control panal

      Originally posted by slimslob
      D1171497 LCD:UWVGA:MV:A SS'Y

      D1171431 PCB:LCDCARFT:A SS'Y

      D1171460 PCB:UWVGA:OP-R :ASS'Y

      PM me with an email address if you want the manuals.

      Good morning
      Thank you for the fast reply and generous inhelping me with the manuals.I will PM you tonite when I get home and maybe tomorrow if you have time you can help me with the manuals as well(I probably wont be getting home to after 10 tonite)
      You have a peaceful day and I hope it brings you something to smile about as well.
      Andy

      Comment

      • Gift
        Service Manager

        1,000+ Posts
        • Mar 2011
        • 2455

        #4
        Re: Ricoh MP C305 Control panal

        If that is covered by a service contract: I think you can also strip an OP panel from an MP301 in case you have a parts donator.

        Comment

        Working...