RICOH SP1000SF Wait for init Card

[Harry]

a nice Day at all
Have a problem with a ricoh Sp 1000 it is hang up at all and Wait for init Card is in display is there a way to reset everything i dont have a manual

Thanks alot for a quick answer

[Jomama46]

If you were changing toner, its asking for the SmartCard. If you were using the SmartCard, it is defective. I am not familiar with that exact message.

[Harry]

thank you

it is not a smartcard problem this maschine hangs up and is not doing anything.i have to reset it at all

[Jomama46]

You can reset to factory parameters with "down"># 0. But I dont recommend it unless you know what you're doing.

[Harry]

please help

i have to pull down # and 0 thats all?

[Jomama46]

i have to pull down # and 0 thats all?

press "down arrow" then # then 0.

[Harry]

see you

i wish to drink that bootle of wisky with you

[Jomama46]

Glad to share with friends

[Harry]

i am from germany

I am German but life for more then 17 years in sardinia my English is not good anymore there is a third lnguage in my head but i anderstand everthing. ripair IBM Typewriters for the americans in germany about 20 years ago and i speack english more then now italien. But ive you dont speak for a while everthing is gon.Here in Sardinia there is a good wine to
drink.

Have a nice Day

[Harry]

a mister jonama 46

This Ricoh is from a friend of mi and he sad he have just do a factory reset There is now way to make it work Is There another possibility?
i dont anderstand wat this init Card means.Mayby its an brand init card to download the programm?

for an answer a glass of wine

[Jomama46]

I have never seen the error code. Maybe your friend should call a tech.

[Harry]

he is a tech

he is a technican and ask mi this favore. he called at ricoh italy and they answered to change the logik board.i cant believe it.first the fax works fine then he trys to force the toner counter at least it hang up in this contitions

[NodXygen]

SP1000SF Wait for init Card - doubt!!!!!!!!

Good, it's completely useless to do the following: "DOWN + # + 0". For the message "init for Watting Card". The equipment will only boot up with the card's boot device, and not the card Tonner.
Card boot, comes with new equipment. You should then be saved for future launches.
If you dont have this card, you should ask your representative, the same.

[Jomama46]

Umm Nod, I think Harry left like 5 months ago.

[NodXygen]

SP1000SF Wait for init Card

It was only to clarify the doubts, not only for Harry, but for everyone.