Help!!!Ricoh 3224C
Help, does not work the touch panel, not 1993CCCCC(not funtion ) in three copiers Ricoh 3224 of this model
-
-
Press Clear Modes first. CM,1,9,9,3,CS(x5)sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+ -
Check rb156041.just released.Comment
-
Can you post that? Tessa only goes up to 040.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
"THE ADHESIVE THAT BINDS ELECTRODES TO THE TOUCH PANEL SURFACE
CONTAINS A POLYMER THAT TENDS TO EXPAND UNDER NORMAL OFFICE
ENVIRONMENTAL CONDITIONS"
Thats the cause.
Solution: REPLACE THE TOUCH PANEL.
Remember the cameras in the 1224 only now you have to buy the parts.
And the good part is that this touch panel is used also in the Apollo, the ADONIS and i dont know what other model.Comment
Comment