Gest Dsm 635 DF J006 paper jams

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MHeon71
    Trusted Tech

    Site Contributor
    VIP Subscriber
    250+ Posts
    • Oct 2008
    • 485

    Gest Dsm 635 DF J006 paper jams

    Pretty new to this machine. The paper stops at the white pinch rollers at the bottom left side of the large transport rollers everytime. I have cleaned out every sensor that I have seen and they all appear to be working. I have cleaned the rollers. The paper is pulled in fine to that point and does not hesitate, the motor stops for a second and starts again for a second and throws the jam. When the paper goes in I see the pinch rollers, in question, turn but on the second start of the roller they do not seem to move.
  • Jomama46
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Apr 2008
    • 2900

    #2
    Replace the one-way on the feed belt drive.
    sigpic
    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

    Comment

    • techspec
      Trusted Tech

      100+ Posts
      • Dec 2008
      • 128

      #3
      Take of the front casing of the DF and check the large white drive gear that is driven by the pulley.

      Have seen them rounding on the shaft.

      An easy fix is to remove the gear and put a small bit of superglue on the shaft and re-attach the gear.

      Hope this points you in right direction.

      Comment

      • MHeon71
        Trusted Tech

        Site Contributor
        VIP Subscriber
        250+ Posts
        • Oct 2008
        • 485

        #4
        As you pointed out, the gear was stripped out and super glue has worked. Thanks for the help.

        Comment

        Working...