The weird downgrade

[darachen]

Hi everyone !
My aficio 2045 was broken down last week. I replaced charge drum, drum, thermostat, fuser roller . Now it works but in SMC report before it said aficio 2045 , now it says aficio 2035 . It means my machine lose 10 page per minute .
This is quite strange , which part above of the machine makes the SMC report change ?
Any idea ?
Many thanks.

[ccchuah]

1045 machine speed

SMC report only show you the plug and play setting for the machine, it won't affect the machine speed. Using service mode 5907 , you can change it back to 2045.

[darachen]

SMC report only show you the plug and play setting for the machine, it won't affect the machine speed. Using service mode 5907 , you can change it back to 2045.

Thank you very much ccchuah . Now ịt comes back as it was thanks to your advise .
Again, thank you very much. (At least my wife doesn't complaint that I downgrade the copier)

[aabarnes1]

Thank you very much ccchuah . Now ịt comes back as it was thanks to your advise .
Again, thank you very much. (At least my wife doesn't complaint that I downgrade the copier)

What's your wife doing anywhere near a copier????

[Jimbo1]

No I know what he means. It's he made the mistake of relating the story to his wife. Been there......