this SR 910 booklet maker finisher is on a 2238c. this seems quite tricky coz its only a few mm out. an A4 folded in half is not touching all corners. obviously its not folding straight.
-
-
Page B602-13 of the service manual for this crap finisher decribes how to check for the gears meshing/timing correctly on the folding plate assembly. it worked for me with a similar issue to that one you described. Also check the gnashers on the timing belt.Good luck AshGrant me the serenity to accept the things I cannot change.
-
If the pressure rollers for folding are dirty it can also cause skew and mis folding.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
-
tried lining the gears up according to the manuel and still the same. where exactly is the timing belt coudnt seem to find it.Comment
Comment