What method do you use to remove excess toner?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DeepRepair
    Technician
    • Nov 2023
    • 22

    What method do you use to remove excess toner?

    Let's say in the mpc3003 how to eliminate excess toner in a developer without changing it
  • ZOOTECH
    Senior member of CRS
    Site Contributor
    2,500+ Posts
    • Jul 2007
    • 3372

    #2
    Re: What method do you use to remove excess toner?

    Originally posted by DeepRepair
    Let's say in the mpc3003 how to eliminate excess toner in a developer without changing it
    "You can't trust your eyes, if your mind is out of focus" --

    Comment

    • DeepRepair
      Technician
      • Nov 2023
      • 22

      #3
      Re: What method do you use to remove excess toner?

      How do I prevent toner from being added while shooting at the sky?

      Comment

      • ZOOTECH
        Senior member of CRS
        Site Contributor
        2,500+ Posts
        • Jul 2007
        • 3372

        #4
        Re: What method do you use to remove excess toner?

        Originally posted by DeepRepair
        How do I prevent toner from being added while shooting at the sky?
        "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • DeepRepair
          Technician
          • Nov 2023
          • 22

          #5
          Re: What method do you use to remove excess toner?

          Do you know any function like that?
          I only know the sp 3100 that disables the reading of the toner chip

          Comment

          • slimslob
            Retired
            Site Contributor
            25,000+ Posts
            • May 2013
            • 34635

            #6
            Re: What method do you use to remove excess toner?

            The first thing you have to do is determine why it has over toned. Otherwise it will just over tone again. Most likely the ID sensor is dirty or defective.

            Comment

            • DeepRepair
              Technician
              • Nov 2023
              • 22

              #7
              Re: What method do you use to remove excess toner?

              Originally posted by slimslob
              The first thing you have to do is determine why it has over toned. Otherwise it will just over tone again. Most likely the ID sensor is dirty or defective.
              It happens that the technicians where I work provide toner and reset the developer
              That's why I want to rescue those developers because they have few copies.

              Comment

              • JLSam
                Senior Tech
                500+ Posts
                • Jun 2015
                • 596

                #8
                Re: What method do you use to remove excess toner?

                "Sky Shots" "DV Check" disable? Your Sharp Tech is leaking.

                Comment

                • fshead
                  Service Manager
                  1,000+ Posts
                  • Jan 2009
                  • 2356

                  #9
                  Re: What method do you use to remove excess toner?

                  split the unit and vacunm nr the mag roller w/out pulling developer off as you turn the unit by hand..in the proper direction....
                  you will see a difference after 5-6 turns...
                  i think the 03 dev units suck..very moody with mag roller void lines on any debris

                  Comment

                  • MIGUELMARCHENA
                    Trusted Tech
                    Site Contributor
                    100+ Posts
                    • Feb 2018
                    • 159

                    #10
                    Re: What method do you use to remove excess toner?

                    The teachers are going to scold me.
                    It has happened to me with poor quality toner or developing units to change.

                    MPC5503


                    I place an empty jar and deactivate 31000001# 1#
                    I'm going to 210900323#1#
                    sp address 2109005# I choose the color #ok
                    I touch COPY and take out the copies that I calculate are necessary to unload the toner from the unit.
                    When I think it's decent, I turn it off, perform general maintenance,
                    (transfer, laser, ID, melter, scanner, etc.)


                    I leave 3100001#0# again
                    I put quality toner.
                    I make full music o 3011002#
                    then 2111...a,b,c,d...


                    exit
                    USER TOOLS
                    MAINTENANCE...printer calibration, copying, etc.

                    Comment

                    • DeepRepair
                      Technician
                      • Nov 2023
                      • 22

                      #11
                      Re: What method do you use to remove excess toner?

                      Originally posted by MIGUELMARCHENA
                      The teachers are going to scold me.
                      It has happened to me with poor quality toner or developing units to change.

                      MPC5503


                      I place an empty jar and deactivate 31000001# 1#
                      I'm going to 210900323#1#
                      sp address 2109005# I choose the color #ok
                      I touch COPY and take out the copies that I calculate are necessary to unload the toner from the unit.
                      When I think it's decent, I turn it off, perform general maintenance,
                      (transfer, laser, ID, melter, scanner, etc.)


                      I leave 3100001#0# again
                      I put quality toner.
                      I make full music o 3011002#
                      then 2111...a,b,c,d...


                      exit
                      USER TOOLS
                      MAINTENANCE...printer calibration, copying, etc.
                      Perfect, thank you very much

                      Comment

                      Working...