A yellow band on solid occurs on cross feed(PRO c5200&5300)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Marwan
    Technician
    • Oct 2023
    • 28
    #1

    A yellow band on solid occurs on cross feed(PRO c5200&5300)

    greetings all.
    I have a Pro c5200s&5300s have same issue with yellow bands happens on cross feed,i have changed opc,developer and charge unit still same issue,
    any suggestion please?
    PS: i have attached the issue but it pearly appeared on the bottom and it occurs on whole page but strong as it seems,looks like a rotate of the opc

    thanks in advancewilliam.pdf
    Tags: bottom, cross, issue, occurs, yellow
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: A yellow band on solid occurs on cross feed(PRO c5200&5300)

      What sort of mileage do the dev units themselves have on them?
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • bat
          Trusted Tech

          100+ Posts
          • Sep 2008
          • 140
          #3
          Re: A yellow band on solid occurs on cross feed(PRO c5200&5300)

          This is a development unit issue, run full dot pattern to identify unit.

            Comment

            • Oze
              Ricoh Fanboy

              1,000+ Posts
              • Jul 2008
              • 1663
              #4
              Re: A yellow band on solid occurs on cross feed(PRO c5200&5300)

              99.9% certain that there are numerous bulletins from Ricoh about this issue.

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 37488
                  #5
                  Re: A yellow band on solid occurs on cross feed(PRO c5200&5300)

                  Originally posted by Marwan
                  greetings all.
                  I have a Pro c5200s&5300s have same issue with yellow bands happens on cross feed,i have changed opc,developer and charge unit still same issue,
                  any suggestion please?
                  PS: i have attached the issue but it pearly appeared on the bottom and it occurs on whole page but strong as it seems,looks like a rotate of the opc

                  thanks in advance[ATTACH]60961[/ATTACH]
                  Did you rebuild the drum cleaning station when you replaced the OPC drum?

                    Comment

                    Previous template Next
                    Working...