I'm New
Thanks friend. Actually I am working in workshop where I have to remove the machine from packing, remove all the tapes used for packing cardboard & thermocall for support, then put on all the stickers, put the developer in the dev unit, put all the toner bottles, fit the finisher, mail bin trays, attach it to the machine, then run the machine. I am given a sheet which explains how I have to go in setup & run all the codes to set the side to side & leading or trailing registrations etc, then go to user codes & set the fax & printer settings etc. I also have to install the fax & printer attachment, then run a trial fax & check the machine for networking (ping test). There is another team which goes to the clients place to install the machine & explain them all the working.
JASPI.
Thanks friend. Actually I am working in workshop where I have to remove the machine from packing, remove all the tapes used for packing cardboard & thermocall for support, then put on all the stickers, put the developer in the dev unit, put all the toner bottles, fit the finisher, mail bin trays, attach it to the machine, then run the machine. I am given a sheet which explains how I have to go in setup & run all the codes to set the side to side & leading or trailing registrations etc, then go to user codes & set the fax & printer settings etc. I also have to install the fax & printer attachment, then run a trial fax & check the machine for networking (ping test). There is another team which goes to the clients place to install the machine & explain them all the working.
JASPI.
Comment