Ricoh MP C 2500 SC 995

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TecnocopyVI
    Technician
    • Apr 2009
    • 45
    #1

    Ricoh MP C 2500 SC 995

    Hi Guys,
    I have a Ricoh MP C 2500 i have a SC 995, i read on service manual , it talk than error of card controller someone can i help me? please Thank you a lot of much!
    Tags: 2500, 995, lef, mpc 2500, ricoh, ricoh mp, sc995, wrong
    • CableGuy
      Impulse Drive Engineer

      250+ Posts
      • Oct 2008
      • 417
      #2
      Oooops

      Have you changed anything on the machine, or have you seen a plume of smoke and a whiff of burning? lol

        Comment

        • TecnocopyVI
          Technician
          • Apr 2009
          • 45
          #3
          lol . i have change controller board whit one Ricoh MP C 3000 , after this i reinstall this controller board on Ricoh MP C 2500 and appeared this SC 995.

            Comment

            • pocket aces
              Ricoh Technician

              50+ Posts
              • Nov 2008
              • 72
              #4
              mpc 2500 & mpc 3000 might have differant part # for the cont. board

                Comment

                • Herrmann
                  Senior Tech

                  Site Contributor
                  500+ Posts
                  • Jan 2006
                  • 792
                  #5
                  in the tech infos, ricoh gives a big "be warned" regarding interchange controller and bicu between 2500 and 3000.

                  if Firmware update does not work for you, it seems that you turned the board into useless junk
                  If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

                    Comment

                    • imaginemoko
                      unTrusted Tech

                      250+ Posts
                      • Jan 2008
                      • 289
                      #6
                      yap good luck on firmware update.... and get the suited bord for your machine....
                      fix the customer first then fix the machine... its simple and makes life more easy.

                        Comment

                        • Dogwars
                          #7
                          Wrong controller board installed is the sc995 code.

                            Comment

                            • TonerMunkeh
                              Professional Moron

                              2,500+ Posts
                              • Apr 2008
                              • 3865
                              #8
                              Spot on Dogwars. The boards for these two machines ARE NOT compatible with each other. Same as the Apollon / Athena, Alex, Russian and Diana. They are all specific to the model.
                              It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

                              Hit it.

                                Comment

                                Previous template Next
                                Working...