mpc5000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • srv
    Technician

    50+ Posts
    • Aug 2008
    • 82

    #1

    mpc5000

    Hi ya'll.Has anyone had any problems with the HDD on the mpc 5000.I have a m/c only a couple of months old with low volume and is showing an sc863-06.The manual is saying hdd or controller.Ihave disconnected the hdd as a temporary measure so that the m/c works with limited fuctions but it seems a bit soon to need a hdd.
  • Fearless V K
    Senior Tech

    500+ Posts
    • May 2007
    • 620

    #2
    This does seem a little soon for a HDD failure, but not unheard of. You can always try to reformat the drive and reload firmware and see if it helps.
    Don't take that toner with me!

    Comment

    • aabarnes1
      Senior Tech
      • Mar 2009
      • 620

      #3
      had the same error code on an mp5000along with scanning problems. machine was only in 2weeks in a low volume 'good' environment, had to change the BICU
      Grant me the serenity to accept the things I cannot change.

      Comment

      Working...