Hi guys
can some one send me the installation step by step for equitrac whith the HID card readrer.
can some one send me the installation step by step for equitrac whith the HID card readrer.
-
-
Perhaps bit more info is required...like...ummm...maybe.... The model of the machine you are installing it on.
Different models may or may not require the installation of an interface board.sigpic
Relax! This firmware injection won't hurt...but it will take 45 minutes.
-
hi dear
ok the machine is MPC2800, i want to instal 50 machines with Equitrac 4.
i want in general about all the machines also if you can help me out.
Comment
-
I haven't done one on that model. The ones I have done on the MPC4500 require an interface board. The 3260/5560 does not. There are also SP modes you have to change in order for the machine to know what type of counter you are connecting and some settings in User Tools to change. Get your manual out and search 'external counter'...in the SP mode section you will see all the different settings. If you don't set the right one the unit won't count correctly. The B&W's are much easier!
My best advise is to get on the phone with your Equitrac rep and give them the model number of the MFP. They have all the settings, harnesses and requirements for each model at least mine did...he was brilliant. Other than supplying the interface board information the Ricoh HotLine was pretty useless because it's a 'third party' unit. Ususally when you purchase from Equitrac...at least here in the states, the initial install is included.sigpic
Relax! This firmware injection won't hurt...but it will take 45 minutes.
Comment
-
hi
the issue here that we are geting Equitrac from NRGI Europ!, they are the only supplyer for us.
at the moment i am having Equitrac V4, can i install it on my company's server to get so hands on, and leter i will install it at my customer server.
and is Equitrac can work alon without the card reader.for atlist printing managment?
regardsComment
Comment