CL7200 / Ricoh printers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Koosie
    Trusted Tech

    100+ Posts
    • Nov 2008
    • 121
    #1

    CL7200 / Ricoh printers

    Can anyone tell me how to enter factory mode on CL7200? I know how to enter factory mode on copiers, but don't know how to on printers. I need to change CPM after nvram and controller board replacement. PM me if you don't want to post it.
    Tags: cl7200, factory mode, printers, release, ricoh
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      Hold down up and down arrows for 6 seconds, release and press enter.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • Koosie
          Trusted Tech

          100+ Posts
          • Nov 2008
          • 121
          #3
          But that only takes me to SP mode, not Factory mode...

            Comment

            Previous template Next
            Working...