lanier 5025 service mode to reset keyopp pass

[JasonW]

Lanier 5025 service mode or manual please I never work on these, and forgot how to get in service mode. I know its some crazy program interrupt clear 0 combo but i forgot the exact order

My company lost the key operator code, guessed everything in the world it could be and still no luck. I have to figure out how to reset / clear it in service mode.

Thank you _so_ much.

Jason W.
Jason@BestOfficeProducts.org

[tcs04]

Lanier 5025 service mode or manual please I never work on these, and forgot how to get in service mode. I know its some crazy program interrupt clear 0 combo but i forgot the exact order

My company lost the key operator code, guessed everything in the world it could be and still no luck. I have to figure out how to reset / clear it in service mode.

Thank you _so_ much.

Jason W.
Jason@BestOfficeProducts.org

C all / 1 0 7 / C stop
(Yellow) (Red)
Then try SP mode 7-810 (See attached) I would suggest using something like the last 4 digits of the serial number or your office phone number as the key op code!

[Scott_Lewis]

Try logging in as an administrator using the default name/pw.

[JasonW]

Still can't get into SP mode. I don't understand your C all / 107 / c stop. I tried it several different ways and it didnt work. I got into SP before, about a year ago, and i remember having to hit program interrupt.

Can you explain it again, I'm sorry. Thank you so much. I know techs only help those that help themselves, I just cant find any info on entering service mode!

[TonerMunkeh]

Press yellow, type in 1 0 7 then press and hold red.

[JasonW]

perfect! thank you so much.

I actually did reset the key code with the five beeps. your doc was so helpful. Reason I'm doing this is to change the Fax RX Terminal ID and Fax number. I got the ID changed but I cant find the stupid fax number.

[Scott_Lewis]

perfect! thank you so much.

I actually did reset the key code with the five beeps. your doc was so helpful. Reason I'm doing this is to change the Fax RX Terminal ID and Fax number. I got the ID changed but I cant find the stupid fax number.

Try Key Op settings, G3 Analog Line

[tcs04]

perfect! thank you so much.

I actually did reset the key code with the five beeps. your doc was so helpful. Reason I'm doing this is to change the Fax RX Terminal ID and Fax number. I got the ID changed but I cant find the stupid fax number.

Lucky you didn't try the other way, could have been trouble!!

[Jerry Chavez]

Lanier 1210 FMD TEL/FAX Mode requires service mode?

Can someone please help me access the Lanier 1210 mfd (multi-function device, fax, scanner, printer) service mode?

I need to reconfigure device to TEL/FAX, and it can only be done from service mode.

[JJB218]

Lanier LD116 reset

Hello, I just acquired 4 of this LD116 baby's, all came with usercodes and have tried 3000 user codes still no luck.
Could you please anyone help me figure out the way to reset them to factory mode please.
I have a tech that will try to make 2 or 3 work out with parts from one machine of spare parts, at $350 dollars was it a good deal?
Thanks for the help,
JJB

[JJB218]

Hello, would anyone help me a parts supplier Online in the US please. Where can I get a parts diagram ?
Thanks again!!!
JJB

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com

Paul@justmanuals.com