Savin 9040 Dual G3 Fax

[Vulkor]

I've got a customer with two G3 Boards in it so they have two fax lines coming in and out of the machine.

They do a TON of Lanfaxing and little Faxing at the copier.

Customer wants to know if there is a way to Designate one line as Outgoing and one Incomming Only??


Anyone know?

[Jomama46]

I think the only way to do this is to set System Switch 16 bit 1 to (0 for example) to set G3-1 as the priority outgoing line. Then for incoming just tell senders to send to that G3-2 number. The downside is that if G3-1 is busy, the outgoing will switch to G3-2.

[Vulkor]

Thanks Jomama46. That may be the ticket. Know if there is a need to select which line in the Lan Fax Drivers?

[Jomama46]

I dont know,but a quick look at the driver box may tell you.

[msaeger]

There used to be a bit switch to set the optional lines to RX only but I did not see it when I checked on this machine. You should look to though I might have missed it.

[Vulkor]

Thanks will check that out.