sc322

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AMIROUCHE
    Junior Member
    • Jun 2008
    • 9
    #1

    sc322

    my copier ricoh aficio1015 displays the code 322. START works in very well but after several copies, one hundred is blocked and code I know that the problem is in the laser unit but what part I do not know please help in finding exactly the problem thank you
    Tags: sc322
    • iMind
      Vacuum Cleaning Expert

      1,000+ Posts
      • Mar 2008
      • 1116
      #2
      Originally posted by AMIROUCHE
      my copier ricoh aficio1015 displays the code 322. START works in very well but after several copies, one hundred is blocked and code I know that the problem is in the laser unit but what part I do not know please help in finding exactly the problem thank you
      Polygon motor.
      sigpicWe can all Win, but at the end we all loose. Save the greyhound

        Comment

        • AMIROUCHE
          Junior Member
          • Jun 2008
          • 9
          #3
          SC322

          I already changed the engine

            Comment

            • mikadonovan
              Senior Tech

              Site Contributor
              2,500+ Posts
              • May 2008
              • 2931
              #4
              SC 322 is a laser synch error. Make sure your connectors on the LD unit are secure.
              The part # for the laser unit is B0391872.
              NEVER ASSUME ANYTHING

                Comment

                • Patish
                  Technician

                  50+ Posts
                  • Aug 2008
                  • 66
                  #5
                  Clean up ALL lenses and mirrors.
                  There is a diode that recognize the laser's ray.

                    Comment

                    • mycopier
                      #6
                      sc322

                      Originally posted by AMIROUCHE
                      my copier ricoh aficio1015 displays the code 322. START works in very well but after several copies, one hundred is blocked and code I know that the problem is in the laser unit but what part I do not know please help in finding exactly the problem thank you
                      Clean up ALL lenses and mirrors
                      Clear all data of laser unit in program mode and set to default
                      Make any LD initialize..

                      Thankss...

                        Comment

                        Previous template Next
                        Working...