Here's a weird one. This machine has about 900 copies on it and at first intermittently and now solid, the top 3 inches of the copy, that is the non-operator side is light and blurry. Just when copying. Printing and prints from memory, like SMC list are perfect. Enlargement and reduction show the same area as blurry. Cleaning the optics does nothing. I have ordered a lens unit assy, because I cant think of anything else. Its down on firmware by one letter but this doesn't seem like a fw problem, I am thinking something is wrong with the CCD chip on the SBU.
Anybody see anything like this?
Anybody see anything like this?
Comment