I have a machine Aficio 1015 with printing option but printssome jungs without seding a print command. Can any one helping in solving this problem.
-
-
Can you scan and post one of the print jobs on here?It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.Comment
-
Garbage printing is usually caused by a corrupted driver. Delete then reinstall it.
BTW, which driver are you using?sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
Aficio 1015/1018
Please find attached unwanted print-out and kindly advise urgently.
Best Regards
OluwadareComment
-
This is the configuration page that always print at startup.
You can disable this from webinterface http://<ip address>Comment
-
Aficio 1015/1018
That message does not only print at start-up but from time to tme even when it is not connected to a system.
I still need your assistance.
Best Regards
OluwadareComment
-
That page SHOULD only print at Startup when the print controller initializes. It may be that your printer is going into Auto Shut Off, the when it is turned back on the sheet will print.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
login to the machine via web browser: 200.200.205.28 this will take you to the configuration page Configure Status Page then uncheck the box that says print page at startup, in order to do so a password will be required
sysadm is the default password for this machine. see PDFsigpicWe can all Win, but at the end we all loose. Save the greyhoundComment
-
iMind, you are a genius.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
Comment