3260 dropping toner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • daveyball
    Trusted Tech

    250+ Posts
    • May 2009
    • 314

    #1

    3260 dropping toner

    Hi Guys

    I have a 3260c dropping toner form the black dev unit, have changed the dev only seems to last a couple of days.

    Any deas?
  • Anders Nilsson
    Technician
    • Nov 2007
    • 33

    #2
    Did you clean the "Doctor gap" ,filming on the" Doctor blade " is very common just as "toner supply clutch assy" the first step is replace the "toner supply Clutch assy" it's
    almost a PM Part
    A

    Comment

    • banginbishop
      grumpy old git

      500+ Posts
      • Oct 2007
      • 894

      #3
      whats the cleaning unit like? is it dropping onto the belt - check the cleaning unit bearings, after a while they go big causing the brush to clog up as it doesnt turn or a clicking noise.
      Incontinentia Buttocks

      Comment

      • turbojetboy
        Trusted Tech

        250+ Posts
        • Aug 2009
        • 279

        #4
        Also replace main air filters.

        Comment

        • ivacopy
          Technician
          • Oct 2008
          • 46

          #5
          Almost always is the cleaning unit (cleaning brash or seal under the cleaning brush)

          Comment

          • daveyball
            Trusted Tech

            250+ Posts
            • May 2009
            • 314

            #6
            Turned out to be the Black toner supply unit

            Comment

            Working...