when sending a "print job to copier" will not duplex.reloaded driver no change.duplex will work when doing regular copy job at copier,just does not work when sending job from desktop.could it be print controller?same from my laptop and also w/crossover.
-
-
Maybe default paper tray for printing is set to no duplex in User Tools, System Preference, Paper Tray Priority for PrinterIBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications -
RPCS driver comes with duplex enabled. PCL5 & 6 require you to enable that function in the default properties.Why do they call it common sense?
If it were common, wouldn't everyone have it?Comment
-
hmmm
well went to select duplex and will not print in duplex sends out two sheets.duplex enabled.Comment
-
Is the duplex unit installed in the accessories tab of the driver?sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
Is the output tray set to the inner tray? Duplex will not work if the output tray is set to the one bin trays (on the left side).Comment
-
hmmm
well i replaced the nic card problem solved.
Comment
-
It IS a little weird.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
Comment