If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Duplex was working, after routing Maintenance a message saying the Duplex not installed, any help to get the duplex back and what is the procedures, thank you
Duplex was working, after routing Maintenance a message saying the Duplex not installed, any help to get the duplex back and what is the procedures, thank you
where do you see this message? config page,printdriver??Hardware is pretty simple on this unit, plug it in. If it still doesn't see the duplex unit check the connector on the machine sometimes the harness on the machine side comes loose from the external connector.
Savin Slp38c
Comment