MP4000B

[The man]

Hi got replace web message on ops panel so changed web and reset the l
folloeing sp codes 7804-04,7805-05,1902-01 to 0% switch off/on,
Still have message, web near end replace web!!!!!!
Any ideas anyone?
Cheers jim.

[totoro]

If a new cleaning web was installed, reset SP 7806-008 & SP 7804-005 (press
"Execute" on the LCD).

Good Luck !!

[The man]

Hi totoro, tried this no joy but today successfuly replaced web on another 4000 after resetting 1902-001 to 0%
7804-005,7806-8 message gone!!
Must be a software glitch on other 4000!!

[Jarken]

HI, Try SP 7806 - 8 , That might work. Cheers

Hi got replace web message on ops panel so changed web and reset the l
folloeing sp codes 7804-04,7805-05,1902-01 to 0% switch off/on,
Still have message, web near end replace web!!!!!!
Any ideas anyone?
Cheers jim.

HI, Try SP 7806 - 8 , That might work. Cheers

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


Paul@justmanuals.com

[tcs04]

Hi totoro, tried this no joy but today successfuly replaced web on another 4000 after resetting 1902-001 to 0%
7804-005,7806-8 message gone!!
Must be a software glitch on other 4000!!

There was a fault on one model (Can't remember which) where if you set sp1902-001 to Zero it didn't clear. try setting to "1" and rebooting. If this works there is probably new firmware which may explain why the other machine was ok.