MPC6000 black pm

[apump]

I have a few of these that are over 350k with only about 6k color. I'm getting ready to put black chagers and blades in it with the other stuff like lube bar etc. how long does it usually take to do this, and what do you replace when doing this. probably going to order the 300k pm kit and do transfer parts also, thanks

[The man]

It's all in the parts manual at the bottom under appendicies you should find PM table.
Worth a try but basically drum blade, lube bar,brush roller, brush roller blade, drum seals if required and charge corona for black unit.
If it's your first time give youself 1 hour.

[apump]

yea first time. I've had the yellow out before, it had streaks build up of toner on the blade so it shouldn't be to bad doing these parts. the lube bar is the only thing different from doing a 6000 or 1356. thanks