Aficio 650 w/ light copies

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    Aficio 650 w/ light copies

    This machine got a new developer a short while ago. The customer makes prints with a high coverage, and is now complaining the blacks are comming out greyish. Any operation that I can tell him to do (toner replenishing or something like that)? I've skimmed over the operation manual and found nothing.

    Thanks!
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: comming, gap, replenishing
    • zyqwiz
      Trusted Tech

      250+ Posts
      • Jun 2009
      • 333
      #2
      The dev unit bias connector fails and causes light copies. Mark the frame before removing the old one as the position of it determines the drum/developer gap!

        Comment

        • tcs04
          FORMER Techie

          1,000+ Posts
          • Apr 2009
          • 1183
          #3
          Originally posted by zyqwiz
          The dev unit bias connector fails and causes light copies. Mark the frame before removing the old one as the position of it determines the drum/developer gap!
          And change the mag roller, the bias pin will be worn.

            Comment

            Previous template Next
            Working...