Ricoh Is200e scanner

cliftonb

Junior Member

Join Date: Mar 2010

Posts: 6
#1

Ricoh Is200e scanner

03-09-2010, 01:48 PM

I have a Is200e scanner that pops up a message, 8817 change replacement parts, when i scan through twain. Have reloaded the twain scanner drivers but with no luck. Any ideas?
Tags: change, counter, drivers, feed, is200e, kit, main, maintenance, message, parts, replace, replacement, reset, ricoh, roller, sca, scan, scanner, twain, user
Gary Bowen

Bowdog

250+ Posts

Join Date: Mar 2008

Posts: 250
#2

03-15-2010, 06:51 PM

There are 3 User Maintenance Parts on this scanner that come in a kit: Pickup Roller, Feed Roller, Separation Pad.To reset the PM Counter:
(1) Select "User Tools" on the Scanner OCP.
(2) Press "1".
(3) Select "17" by scrolling "Next" or "Prev".
(4) Press "Settings".
(5) Press "Reset".
(6) Press "Yes".
The mainteance interval of the 3 parts are 90K; it would be best to actually replace them to avoid headaches down the road.
Comment

Comment