Hello all!
I have an Mp2000 that prints mostly black pages (with margins) with the controller (feature expansion unit) plugged in. Also it shows "memory full" when you try to copy things. If you remove the controller unit, it works fine (no print/scan, obviously). I got the same behavior when I removed only the print/scan dimm. You can't print anything without the memory as you get sc819.
Previously about nine months ago, I had an issue with this machine where it would not warm up, just sat in please wait mode. I reseated the controller then and it fixed it. Anyone run into something like this? I found nothing in bulletins or goose's and my service dept. manager is giving me the evil eye for wanting to order a new controller board (B843).
It occurs to me it could also be a bad memory chip?
Thanks.
Morgan
I have an Mp2000 that prints mostly black pages (with margins) with the controller (feature expansion unit) plugged in. Also it shows "memory full" when you try to copy things. If you remove the controller unit, it works fine (no print/scan, obviously). I got the same behavior when I removed only the print/scan dimm. You can't print anything without the memory as you get sc819.
Previously about nine months ago, I had an issue with this machine where it would not warm up, just sat in please wait mode. I reseated the controller then and it fixed it. Anyone run into something like this? I found nothing in bulletins or goose's and my service dept. manager is giving me the evil eye for wanting to order a new controller board (B843).
It occurs to me it could also be a bad memory chip?
Thanks.
Morgan