ricoh 2035 e empty toner load toner

[Guest]

I have a problem that whenever ili2500 1000 copy after copy of messages on the display comes on the display that the machine does not have to put the toner and toner but the bottle is full. Copies of many faint. After that, go into service mode and true copies forsed toner is great and getting a good copy.after 2500 or 3000 again appears that there is no tone. I changed the developer, but my problem is back> Please help me what the problem is. Thank you

[mrwho]

Check this thread. More likely than not, the answer to your problem lies there.

[PA5RR]

You could also try stripping down and cleaning out the toner hopper.
Check the four mylars/plastic blades are present ...They tend to come loose and block the toner entrance to the drumunit If so, re attach them with a srew or get a new hopper.