Ricoh Afici 1232/1224c toner chip reset

[m_donakov]

Hi, is there any posibility to reset chips to catriges on ricoh aficio 1232, becouse on yelloe show me emty catridge a there is a half tonner inside a throw much toner with this,

Regrads Mile

[Eric1968]

The amount of toner in the cartridge/DV-unit is controlled by pixel count and a toner end sensor. The chip only tells the machine if the toner is new or not. If you're sure that the replace toner message is false, then you could have a problem with the DV-Unit (defective gears, toner end sensor).

[paperclipsandbubblegum]

Make sure firmware is at these levels BICU-1.262.01 and controller-2.02. SP 7923 1-2-3-4 to reset toner end messege,

[m_donakov]

Make sure firmware is at these levels BICU-1.262.01 and controller-2.02. SP 7923 1-2-3-4 to reset toner end messege,

Thanks For this this slove my problem reseting Chips Regrads

Thanks a Lot


And one more question is there any compatible tonner in bottle so i coud refil catridges?

[Eric1968]

If you want your machine to behave normal, then DON'T use compatible toners!!

[m_donakov]

If you want your machine to behave normal, then DON'T use compatible toners!!

Ok but which tonner type is compatible with this machine, i cant find

[zyqwiz]

It takes 1224c/1232c toner - there will be loads of it knocking about as it is such an awful machine

[m_donakov]

Bot I have one old machine i dont used it and i awnt to tray to refill it, thas anybody know is there compatible toner for this,