2535 skewed image wont go away

[ValSupply]

Can't get the skew to go away on this machine. is registration buckle adjustment the culprit or side to side adjustment the better option. any help is greatly appreciated!!! Thank You!!

[Eric1968]

If you're having skew when printing it could also be a bad registration clutch. To correct skew you can adjust registration buckle.

[teebee1234]

Can't get the skew to go away on this machine. is registration buckle adjustment the culprit or side to side adjustment the better option. any help is greatly appreciated!!! Thank You!!

Is it skewing on both copies and prints? If only on copies then your scanner needs to be leveled.

[ValSupply]

rite on the scanner and ardf both had to be adjusted. Thank you!!!!!