MP4500 B+W

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rednecktech
    Technician

    50+ Posts
    • Jan 2010
    • 54
    #1

    MP4500 B+W

    Im getting a jam code58 vertical transport jam it has a bridge and 790 finisher its kicking my butt its only has 120k on it > any ideas
    Tags: 1st, 500, 790, bridge, code, finisher, jam, jam code, mp450, mp4500, sensor, start, transport
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      It is saying the 1st v-xport sensor is not turning off. I would start by blowing out the sensor or just replacing it.
      Use the input check SP5803-007 bit 2
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • bob scheffer
          Technician
          • Mar 2010
          • 27
          #3
          I would replace the feed clutch, relay clutch, and reg clutch as a set. If that didnt work, then i would replace the sensor.

            Comment

            • msaeger
              Trusted Tech

              250+ Posts
              • Sep 2008
              • 333
              #4
              Yeah I would guess a relay clutch, clutches fail way more than sensors. Won't hurt to blow out the sensors though.

                Comment

                Previous template Next
                Working...