afico 2105 error

[faisal jilani]

hi.i have one machine afico 2105 this machine after on error code is caming
SC672: Controller Startup .i replace control panel and harness but same.and sam time pleas wait is caming.thinks

[iMind]

[Montana Tech]

Not sure why you replaced the control panel. The Controller Board is more likely where the problem is at, especially since you tried replacing the wire harness. I'd try reseating all connectors on the controller board first.

[faisal jilani]

hi,i chak all connectors already but it is sam montana

[PA5RR]

To be sure it's the harddisk, just disconnect it !
Your machine should start with no faultcode.

[babar ali]

i think i can solved ur problem

Salam to all, well dear its not a big problem, you just changed the 128 ram on controller board.and i hope u will be get 100% result.

[babar ali]

i haved lots of experience in RICOH digital models specialy in 2090/2105.if any body needs my help then online talking with me on my cell number. +923334669684 or +923434504650, mail me love_life_work@yahoo.com, babar_eng_lhr@yahoo.com. thanks
best regard's
Syed Babar Ali

[tcs04]

To be sure it's the harddisk, just disconnect it !
Your machine should start with no faultcode.

It WILL show a code, but not SC672.

[leeyeo]

totaly need to change controller board~~nothing faulty for the control panel