[Misc] lanier LD 328C firmware request ( ricoh 3228C)

[mdavin]

I need firmware for the lanier LD 328C to address a SMB digital signing problem I'm having while setting up scanning to vista and 7 OS's. If anyone could help I appreciate it.

[tinfox]

me too, me too!

[iMind]

There are no firmware updates since Nov. 2007 the only updaded firmware is SR790 OCT 2010

[iMind]

Sorry found it: upload soon...

Symptom corrected:
1. SMB folders can not be registered in the address book.
2. Extra steps are required if a user provides an invalid username or
password for Scan to SMB.
3. Unable to Scan to SMB to Windows 7 or Windows Server 2008 R2
destinations that have Windows Live ID Sign-in assistant installed.
4. Trying and failing to login to a Scan destination three times might result
in the Scanner application stalling.
5. Unable to Scan to SMB to Windows 98/98SE/Me/NT 4.0 destinations
specified using an IP address.
6. The SMB retry function fails to retry the sending of failed SMB transfers
(Scan to SMB or Fax delivery).
7. Unable to retrieve the Windows group name from a Windows 2008 R2
server during Windows Authentication. Because of this, logged in users
will only be granted the "Available Functions" specified for them in the
Addressbook.
8. The device is unable to assign group privileges to a logged in user if that
group has a name consisting of more than 20 bytes. To address this
issue, the supported group name length will be increased to 40 bytes.
9. The MFP's Windows Authentication function is unable to use Kerberos
when being authenticated on a Windows 2008 or Windows 2008 R2
server. The MFP will still be successfully authenticated because it is able
to fail back to NTLMv2.
10. After changing the MFP's DNS server address or Domain name, Scan to
SMB destinations specified using a hostname might not be found.
11. The Scan to SMB "Connection Test" fails if performed on directory
located directly below a DFS root. Only the "Connection Test" failed,
scanning was successful and even the "Connection Test" worked if
performed on any sub-directory.
12. The device might return an SC 819 error when browsing the network
using SMB. This only occurred if SMB was browsed frequently and the
device was not rebooted.
13. If the MFP's IP address is changed to an IP address of another subnet,
users will not be able to browse the network (using Scan to SMB) until th
MFP is rebooted.
Other changes:
1. Unable to Scan to SMB to a destination that is not specified using an
FQDN.
2. Unable to Scan to SMB to destinations that are using both LM
Authentication and Samba v2.x.
3. Windows Authentication fails if the username or password includes
lower-case European characters.
4. The device's SMB timeout was too short (1sec). This caused problems
when being used across subnets. For this reason, it has been increased

to 10 sec.

[iMind]

uploaded.to - where your files have to be uploaded to

[mdavin]

LOL! almost a year late!

[iMind]

LOL! almost a year late!

hehehe, only looked at the date after answering
Tinfox should have opened a new thread "I KILL YOU" LOL