Configration page at start up Ricoh 1305f /1013

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • konica7255
    • Sep 2024
    #1

    Configration page at start up Ricoh 1305f /1013

    Hi

    could some one help to stop the configration page at startup.

    Regards,
    Tags: 101, 1013, 130, admin, configuration, eps, help, interface, network, off, one, page, password, print, ricoh, start, startup, stop, tools, turn, user, web, web interface, work, wrong
    • CSI
      Technician
      50+ Posts
      • Oct 2008
      • 73
      #2
      Network configuration page print at startup = OFF

        Comment

        • konica7255
          #3
          How to do that I mean what are the steps to reach.

            Comment

            • mikadonovan
              Senior Tech
              Site Contributor
              2,500+ Posts
              • May 2008
              • 2932
              #4
              You probably have to do it in user tools.
              NEVER ASSUME ANYTHING

                Comment

                • Fearless V K
                  Senior Tech
                  500+ Posts
                  • May 2007
                  • 620
                  #5
                  I could be wrong, but you may only be able to turn it off by admin'ing into the web interface.
                  Don't take that toner with me!

                    Comment

                    • iMind
                      Vacuum Cleaning Expert
                      1,000+ Posts
                      • Mar 2008
                      • 1116
                      #6
                      Login as administrator thru web interface: HTTP:\\XXX.XXX.XXX.XXX (IP) then login sysadm as admin and type password
                      sigpicWe can all Win, but at the end we all loose. Save the greyhound

                        Comment

                        • mikadonovan
                          Senior Tech
                          Site Contributor
                          2,500+ Posts
                          • May 2008
                          • 2932
                          #7
                          No wonder I couldn't find it in the manual.
                          Originally posted by iMind
                          Login as administrator thru web interface: HTTP:\\XXX.XXX.XXX.XXX (IP) then login sysadm as admin and type password
                          NEVER ASSUME ANYTHING

                            Comment

                            • konica7255
                              #8
                              Thanks iMind it is done without password.

                              Regards,

                                Comment

                                Previous template Next
                                Working...