[Error Code] Spc 410 dn sc301

[Guest]

Anyone else ever had a reoccuring SC 301 on this model ?
My problem child seems to do it after wake up each morning - I have latest firmware installed, and have tried another entire faceplate ( containing all the HVT contact pins....)

[Vulkor]

This is a Color printer right??

High voltage power board: Charge voltage output error [M]
The measured voltage is
not proper when EGB
measures the charge output
for each color.
• Defective charge roller
• Defective connectors
• Disconnected harness
• Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for magenta.
3. Replace the drum positioning plate.

[iplayfenders]

Have already covered (replaced) these items at various times