the copier have 700.000 prints, and the problem is i have an SC326 wich is sort of laser thing, i change the LD unit last year when i had the same SC and now is same could be anything else ? Could laser live only 1 year ?
-
-
If the machine is blowing toner due to a poor seal between the dev unit and PCU the laser board may only last one week!! Change the foam seal and lock the units together! -
ty for the point, but i allready change it couple of mounths ago when i install new dev and pcu.Comment
-
Try replacing the front door switches. When these begin to fail they can give you laser faults."See if you can rent a spring hook and a phillips screwdriver it will make your life that much easier..."Comment
-
I solve the problem it was the sync board, the little one in the back of ld case.Ty for ur points guys.Comment
Comment