MP 6000 SC819 Error Code

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • iscott
    Trusted Tech
    250+ Posts
    • Mar 2010
    • 342
    #1

    MP 6000 SC819 Error Code

    Apparently it is either corrupted firmware or a bad controller.





    Any advice?
    Tags: 600, advice, bad, can’t, clear, code, controller, error, firmware, roller, stop
    • TonerMunkeh
      Professional Moron
      2,500+ Posts
      • Apr 2008
      • 3866
      #2
      Controller would be most likely, especially as the SC won't clear. Have you disconnected the HDD's?
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • iscott
          Trusted Tech
          250+ Posts
          • Mar 2010
          • 342
          #3
          No I haven't

            Comment

            • jonhiker
              Senior Tech
              500+ Posts
              • Apr 2010
              • 661
              #4
              Originally posted by TonerMunkeh
              Controller would be most likely, especially as the SC won't clear. Have you disconnected the HDD's?
              X2. try disconnecting the HDD and then power the machine back up and see if it comes to ready as a basic copier. power off, replug in and power back on.

                Comment

                • tcs04
                  FORMER Techie
                  1,000+ Posts
                  • Apr 2009
                  • 1183
                  #5
                  Originally posted by jonhiker
                  X2. try disconnecting the HDD and then power the machine back up and see if it comes to ready as a basic copier. power off, replug in and power back on.
                  and reseat the memory DIMMS

                    Comment

                    • sostek
                      Technician
                      Site Contributor
                      50+ Posts
                      • May 2010
                      • 80
                      #6
                      Had the same trouble with a MP7500 today, ended up with an SC834 0F41 after disconnecting and reconnecting HDD and DIMMs.Not sure where to go next. Interested in what fixed it.

                        Comment

                        Previous template Next
                        Working...