Hello all! I have a MP 2510 with only 45K on it and its sayin gto replace the PCU already. These are rated for 60K, so is there a service mode that was set to a lower setting? Or is this all controlled by a crum chip or something on the PCU? Any thoughts?
-
-
No its a setting in the machine, call your tech and ask him to change it to the factory setting of 60k. The current setting may be annoying but it wont stop you from using the machine.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+ -
sp5912-1 set to 0 will turn off the pcu alarm and sp5912-2 is the interval (default is 60 (K))Comment
Comment