G'day,
I have recently acquired a 5560 copier, but the cable was missing to connect the E7000 Colour controller. Ricoh where unable to help as the machine isn't on a service contract, so I bought a cable which runs pin 1 to pin 1 through to 50 but it doesn't work. I have heard that the machine won't work if the cable is run in the wrong direction which leads me to think that the genuine cable is wired in a certain pattern...
Any suggestions?
With thanks, Mark.
I have recently acquired a 5560 copier, but the cable was missing to connect the E7000 Colour controller. Ricoh where unable to help as the machine isn't on a service contract, so I bought a cable which runs pin 1 to pin 1 through to 50 but it doesn't work. I have heard that the machine won't work if the cable is run in the wrong direction which leads me to think that the genuine cable is wired in a certain pattern...
Any suggestions?
With thanks, Mark.
Comment