Ricoh Aficio 2090 Toner hardening up?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Oscar57
    Technician

    50+ Posts
    • Apr 2008
    • 79
    #1

    Ricoh Aficio 2090 Toner hardening up?

    I am having a problem with a Ricoh 2090. The toner inside the drum carriage where the recycling coil is hardening up and stopping the coil from spinning. The toner comes out in chunks and is hard. Has anyone had this happen? I'm leaning towards bad toner but all the toner in stock is from the same batch # and is fresh. So I was wondering if anything else can make this happen?
    Tags: 2090, aficio, bad, batch, drum, ricoh, ricoh 2090, side, spinning, stopping, toner
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      More likely to be a lack of circulation, clean the fan blades and change the filters, the heat from the fuser is causing the problem. This can be exasperated by very low volume accounts.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • teebee1234
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jul 2008
          • 1670
          #3
          Originally posted by Jomama46
          More likely to be a lack of circulation, clean the fan blades and change the filters, the heat from the fuser is causing the problem. This can be exasperated by very low volume accounts.
          X2

            Comment

            Previous template Next
            Working...