Dsm635 intermitent SC350

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • homer
    Technician
    • Nov 2009
    • 18
    #1

    Dsm635 intermitent SC350

    SC350 intermitent
    Hey Guys,

    I have a Dsm635 with an intermitent SC350 code. Seems to happen between 8 and 9 oclock in the morning. Sometimes it doesn't happen for a month sometimes every other day. I have replaced ID sensor , drum shaft ground assm. Full PM on PCU and developer unit. Any ideas?

    Thanks
    Tags: code, developer, developer unit, drum, dsm, full, id sensor, pcu, replaced, sc350, sensor, unit, vsg
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      Is the drum being cleaned? Is the shield glass clean? What are the Vsg/Vsp readings?
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • rthonpm
          Field Supervisor

          2,500+ Posts
          • Aug 2007
          • 2847
          #3
          Check the high voltage board as well.

            Comment

            • verderacer
              Trusted Tech

              100+ Posts
              • May 2008
              • 158
              #4
              I have seen this problem caused 3rd party drums; kind of a dark green and spun aluminum. I am also wondering how the patterns look? You can trip the door to watch the patterns. The VSG/VSP readings will give you some ideas of where to look also.
              Ricoh & Microsoft may pay the bills but Un*x saves my ass every day.
              MCSE/CCNE/ENS and other crap...

                Comment

                Previous template Next
                Working...