SC-534 On Ricoh MPC7500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • devhead
    • May 2025
    #1

    [Error Code] SC-534 On Ricoh MPC7500

    Hello,
    Got a machine bringing up this code canstantly.....duplexer fan is not siezed and both
    operate through output check in test mode. Is this common fault ???? any help would be greatly appreciated.

    Trev
    Tags: 500, code, duplexer, fan, fault, mode, mpc, ricoh, test
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      This code will come up if the fan isn't turning fast enough. Doesn't have to be stopped. Clean the blades or replace the fan. (May also be paper in the fuser connector.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • devhead
          #3
          Hey thanks Jomama...it was paper obstruction in the fuser connector...missed it completely.

          Regards,
          Trev

            Comment

            Previous template Next
            Working...