Gestetner MP3350 (How to setup key counter& installation on machine)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gesttech
    Trusted Tech
    • Oct 2009
    • 123
    #1

    Gestetner MP3350 (How to setup key counter& installation on machine)

    Hi

    PLS, I would like to know how to setup & install keycounter Device on machine Mp3350 & what i need to order because my client have magnectic card in stock & would like to change machine Gestetner Dsm635 to Mp3350. What keycard/counter device i need. On What Pin on bicu i need to plug it?.

    Thanks.........
    Tags: 350, act, change, counter, diagrams, gestetner, identical, install, installation, key, keycounter, mp3350, purchase, stall
    • mikadonovan
      Senior Tech

      Site Contributor
      2,500+ Posts
      • May 2008
      • 2931
      #2
      As far as the installation, check your SM under installation.It should list the procedure for installing the key counter and where you plug it into. As far as the counter itself, you may need to contact the manufacturer and purchase a Ricoh compatible harness. I had to do this for a Hecon a while back. Fortuantely with it I just plugged it in and enabled key counter in SP modes. Easy install.
      NEVER ASSUME ANYTHING

        Comment

        • tcs04
          FORMER Techie

          1,000+ Posts
          • Apr 2009
          • 1183
          #3
          Originally posted by Gesttech
          Hi

          PLS, I would like to know how to setup & install keycounter Device on machine Mp3350 & what i need to order because my client have magnectic card in stock & would like to change machine Gestetner Dsm635 to Mp3350. What keycard/counter device i need. On What Pin on bicu i need to plug it?.

          Thanks.........

          Probably a type C counter interface fit, As mikladonovan said, it's in the installation SM for the main machine.

            Comment

            • E Winter
              #4
              It is very likely that the MP3350 has the same connector on it's bicu as the Dsm635. I'd recommend to study the peer-to-peer/wiring diagrams of both machines just to be shure that the pin assignment is identical as well. I'm pretty shure you can re-use the stuff from the Gestetner so you don't have to order anything. All software-related settings should be documentated in the service and user manuals.

              I'd recommend to ask the customer if it's OK to uninstall the key counter one or two weeks before they get the new machine. In this case you can prepare the new machine in your shop with some time in case something doesn't fit or you have to improvise/order something.

                Comment

                • JustManuals
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2006
                  • 9838
                  #5
                  This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


                  Paul@justmanuals.com

                    Comment

                    • E Winter
                      #6
                      ....or get these manuals 4free - just ask in the right sub-forum

                        Comment

                        Previous template Next
                        Working...