Ricoh Aficio 240W

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • toshiba
    Technician

    50+ Posts
    • Dec 2006
    • 58

    Ricoh Aficio 240W

    hi friends,
    in ricoh aficio 240w, while scanning thru scantool as pdf file, the scanned page is getting cut and into 2,3 segments parallel to scan direction. it happen only intermittently and th OS is windows XP. and while printing thru plotbase also some clients in the network sometimes getting "access denied" message. what can be the possibilites?
  • Cipher
    It's not easy being green

    1,000+ Posts
    • May 2006
    • 1309

    #2
    Crap design these wide format machines imo.

    The scanner has five CIS arrays that slightly overlap one another.
    The CIS joins may need fine adjustment to make all five CIS align correctly or the result could look like separated segments.

    Same story with print engine accept it's three overlapping LPH arrays (2 joins) that write the latent image to the drum.

    For the 'access denied' error check the share permissions on the 'spool' directory.
    (The Ratio software is also not that great either).
    • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

    Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

    Comment

    • Tonerbomb
      AutoMajical Resolutionist

      Site Contributor
      2,500+ Posts
      • Feb 2005
      • 2589

      #3
      Also update to the latest version of plotbase. V.3.6.037
      Mystic Crystal Revelations

      Comment

      • toshiba
        Technician

        50+ Posts
        • Dec 2006
        • 58

        #4
        thanx friends and i'll try all.

        Comment

        • copierpro
          Trusted Tech

          250+ Posts
          • Apr 2007
          • 270

          #5
          Plotbase software

          Anyone know of known issues trying to use plotbase CD I have in a 240w controller box in a PC connected to a 470w in the field?

          Comment

          Working...