If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a customer with a SPC410 that we put user codes on. I have checked all the menus that i know of but cant find where to print out how many pages each user code have printed.
according to the users guide, you get this info via smart device monitor for admin. install the program, it will see all of the devices on the network, then go to tools>user management tools. it will ask you for a login, which should be admin, no password, and it will display the information.
Comment