[Error Code] Aficio dsc232

[Guest]

hi
i have aficio dsc232 it show error code 220 and 481 please help me i am very tired

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


Paul@justmanuals.com

[Ricohslave]

SC481 is often caused by a damaged transfer belt. With the PCU out of the machine, rotate the belt transfer belt completey and check for any damage on the edges.

[jonhiker]

SC220

1st beam synchronization error
A polygon motor lock is detected; the LD door is closed; and the LD remains on.

The LD error (1stbeam synchronization error)
continues for 0.5 seconds.
Solutions:

Disconnected synchronization detector board

Defective LD unit

Defective BICU
SC481

Transfer belt mark detection error

The main motor is operating; andthe lock signal is detected. The belt mark sensor signal does not
change for 120 milliseconds.
Solutions:

Defective main motor

Image transfer belt out of position

Belt mark blurred or absent

X2 on checking the transfer belt for the 481 code. The 220 code could need just a reset.

[Ahmedhalol]

please , i know that i am troublesome but please send me the error code correction on Sp an some notes on this case with some picture on this error