Gestetner 660sp Printing in Duplex....Setting needs to be changed?

[Kyocop]

Hi!


A client has a Gestetner 660sp hooked up to a network and cannot get it to Duplex PRINT. Is there a setting that needs to be changed on the machine itself?

Thanks in advance.

[zed255]

Make sure the duplex option is enabled under the printers properties in the print driver. If the machine's setup wasn't auto detected then you won't have access to the options until you have checked then off on the accessories tab. So long as the machine itself recognizes the duplexer, say in copy mode, then there's nothing to do to the machine itself.

[Kyocop]

Thanks! Thought it had to be on the network's end but just wanted to make sure there was nothing I could do just on the machine itself.