Ricoh AP 3800C

[RebelPhoenix]

Hello dear friends,

I have a bad trouble. My machine has SC820 sc code. I must reload firmware. How is the reload firmware again?

[TonerMunkeh]

Using a 4MB PCMCIA card and a copy of Memory Card Explorer from Tessa.

[RebelPhoenix]

I have 4MB PCMCIA, Memory Card Explorer, Tessa-account, Firmware file. But I don't know now How is the firmware update? I read the service manual but I don't understand anything. This machine's firmware update procedure is very mixed

[jonhiker]

Put your PCMCIA card into the expansion slot on a laptop. Then using memory card explorer, load the firmware onto the card. Remove the cover on the controller to expose the slot, put the card in and power on the machine. You can only do one file at a time.

[RebelPhoenix]

I turn on the machine after machine show the SC-820 and It's don't show different screen. (Firmware update)

[jonhiker]

SC820 is a controller error. You might have to replace the controller or the RAM if it won't go to the firmware update screen.