If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The colour registration has gone off on this unit . When I try to do a automatic colour registration adj is says cannot complete . Are there any tricks to rectify this?
If only yellow is the problem I would replace the yellow drum/dv-unit. Also check the condition of the transfer belt unit, and clean/check the ID-sensors. If the transfer belt is over 250k, replace it with a new one.
Comment