[Error Code] Gestetner 3355 Has SC 360 And Sc 955

[Bluezman]

Hi
Customer Call complaining That the machine would no longer Print Ip Is Ping able I cleared out the Que on the sever(which was full) and they are able to print from there local print driver and the server for a bit then machine codes out restarting the machine from the main power switch(lower left side) clears the codes however now trying to copy throws the SC 955 also another strange code that looks driver related cam up SC 202.FFCC8200 this only a appeared once 2003 3 server workstations are 7 pro are there OS that have been working fine until now

thanks in advance
D

[albasoul06]

SC 955 [SC955] - HDD 1 defective
SC 955 memory setting error custom interface board ~ A2949520, this can be tried if machine does not have a regular interface installed ~ TSB - 055.
SC 955 memory setting error HDD 1 defective
SC 955 memory setting error reinstall firmware
SC 955 memory setting error Update engine firmware to version P, 7.50 or higher.


SC 360 [SC360] - BICU PCB defective
SC 360 [SC360] - HDD defective
SC 360 [SC360] - poor connection between dc power connector to the HDD
SC 360 [SC360] - replace PSU
SC 360 HDD detection error 1 - HDD defective
SC 360 HDD detection error 1 - BICU PCB defective
SC 360 HDD detection error 1 - HDD jumper in wrong position
SC 360 HDD detection error 1 - poor connection between dc power connector to the HDD
SC 360 HDD detection error 1 - replace PSU
SC 360 If machine displays numerous SC codes Replace power supply
SC 360 Replace power supply
SC 360 solution HDD jumper in wrong position