Sender Name setup for af2027

[Peter Sim]

Hi all,
Need help.Is there any sender name set up for af2027?

Thank in advance

[Slakkie4x2]

yes

under send settings you can set the default senders name

[ricoco]

Have to put the administrator e-mail (that is the sender email) "name sender"@domain.
Than just activate the auto sender name under the "file transfer"

[zed255]

Also, when creating address book entries, you can select to use the entry as a sender. When you send you select the sender from the available entries in the address book.

[Peter Sim]

Thank you every one for reply.Actualy i am new to to ricoh machine.Just started to learn this model .I had successufully setting up the scan to email features and now i wanted to do smb scan.What do i need to do setting on the copier?

[ricoco]

Thank you every one for reply.Actualy i am new to to ricoh machine.Just started to learn this model .I had successufully setting up the scan to email features and now i wanted to do smb scan.What do i need to do setting on the copier?

On each user that you create you have to put the path to the folder.

EX:

[ricoco]

Thank you every one for reply.Actualy i am new to to ricoh machine.Just started to learn this model .I had successufully setting up the scan to email features and now i wanted to do smb scan.What do i need to do setting on the copier?

First of all you have to create a shared folder with permition to read and write on the computer
Than You have to put the path on each user that you allready create.
EX: \\computer name\shared folder
Dont forget to put the authentication to the folder for each user. That is very important

[anthony123]

Do yourself a favor and keep it scan to email only, It works great, everyone can scan to there own email (no one has to share) and all is good in ricoh land......